Carbide burrs are tools useful for deburring most hard materials like ceramics, stone, steel, aluminum, plastics and hardwood. They offer precision, and may be used in cutting, shaping, grinding and chamfering hard materials.
Carbide burrs may be used on a various materials like metals (including Steel aluminum and surefire) and all sorts of types of wood. Quite a few on acrylics, fiberglass and plastics too. Carbide burrs can last for quite a while without chipping or breaking so that it’s so competent to utilize them on soft metals like gold,platinum and silver.
What are Advantages of Carbide Burrs Compared with HSS Burrs?
Compared with HSS, Carbide Burrs are much harder.
The Tungsten Carbide is very hard in order to supply in wider range of work than HSS (High Speed Steel).
HSS can’t be as good as carbide burrs if they’re at temperature. Carbide Burrs can bear hotness and can run for longer time.
Carbide won’t soften at hot temperature but HSS burrs is opposite. There’s no question that carbide is a better choice.
Utilizing Carbide Burs:
For more stability, insert the accessory bit in to the unit and then back against each other slightly before tightening on the collet nut or keyless chuck.
Avoid the use of these for drilling holes or enlarging holes which are under twice the diameter from the cutter. The tungsten carbide surface can simply catch the side of the hole and break the part.
Use higher speeds for hardwoods, slower speeds for metals and slow speeds for plastics (to stop melting at contact point).
Start in a lower speed. Then increase on the speed which gives one of the most favourable results.
Tend not to apply excessive pressure. It can reduce the spindle and chip cutting edges. Let the bur do the cutting.
Make use of the sides of the cutter for effective cutting. The end cuts poorly and may break under time limits.
Never in-capsulate the bur inside the cut. If chattering occurs, increase speed.
When you use aluminium and magnesium, consider some sort of lubricant, wax or tallow, as it can help stop the flutes from loading or packing.
Carbide burs, if used the appropriate way, will outperform HSS burs by 50
For more info about SD-51 Carbide Burrs go to see this popular resource
