Blackboard paint can be used to create a writing surface, a conversational piece or a shopping list in your own home or school on wood, tile, sheet-rock, glass, metal or on your interior walls. These could be exercised by setting up a black, non-reflective, smooth surface that is easy to as well as wipe having a duster or normal soapy water. The surrounding walls are then decorated in more pronounced colors in order to make a contrast.
To make a blackboard, you need a cleaning cloth, soap, Primer, Paint stirrer and a Paint brush. First clean, dry and clear away the surfaces off grease, and other contaminants. If the blackboard paint is usually to be applied over more than a standard emulsion, then you can paint upon the counter, of course after cleaning off of the dirt. However if you do it over bare wood, you will have to fill any noticeable cracks and knots using a primer.
Throughout the blackboard eraser, you must stir it while in the can to acheive a definite and evenly mixed solution. These stirring process needs to be applied continuously throughout the painting process. Work with a brush to utilize the first coat, allow it to dry for some time and after that apply the second and third coat, every time sanding it before using another coat.
Under normal circumstance your blackboard needs to be ready for usage within Twenty four hours after the last coat. This though depends upon the aeration and also the temperature of the surrounding. The end product gives you a Matt black finish, will be hard wearing and non-reflective. The blackboards are finding uses on scoreboards and menu boards being that they are easy to clean an wipe.
To get more information about blackboard eraser go this useful site: look at this
